Review the warning message, then select Update if desired. Program Selection Tab Figure 3-6 Change SettingsAdvancedProgram Selection Tab The audio group from a disembeded SDI bitstream can be selected for playback via this screen.Įrror Log Figure 3-8 Change SettingsView LogError Log Select Error Log to view a list of operational errors reported.Ĭlick Select File and browse to the desired file. The Open Device screen appears: For future use For communicating with DMA8 For running the software without connecting to the DMA8, or for entering setup parameters and saving for later use Figure 3-1 Open Device Screen.ĭownmix Screen Channels When enabled, five screen-channel mixes from digital media sources are downmixed to three channels (L, C, R) for proper playback in cinemas with three screen channels. The Serial Data To SA10 connector outputs the bitstream to a Dolby SA10 equipped with an Cat. SPDIF is found using either coaxial unbalanced connections (one signal conductor plus shield) with a characteristic input impedance of 75 with RCA (phono) connectors, or a. Proper mounting and wiring of booth equipment helps ensure trouble-free performance. The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as coffee cups, shall be placed on the equipment.Ĭarefully remove the unit from its carton, remove the plastic wrapping, and place on a flat surface. IMPORTANT SAFETY NOTICE This unit complies with the safety standard EN60065. To use the cord in the UK, cut off the CEE77 plug and replace with an approved BS 1363 13A plug. It equips any theatre for a wide variety of uses, providing capabilities far beyond that of simply showing movies to the general public. The DMA8 expands the use of a cinema beyond traditional film applications. These manuals are designed to facilitate the exchange of information related to cinema projection and film handling, with no warranties nor obligations from the authors, for qualified field service engineers.ĭigital Media Adapter, DMA, and Surround EX are trademarks of Dolby Laboratories.Īll other trademarks remain the property of their respective owners.ĭolby Laboratories, Inc., all rights reserved. Other indicators reveal the bitstream format, the Decode mode, and eight-channel analog output signal presence. The valid indicators verify digital signal presence on each associated input. Simple manual control is provided by the four digital input buttons and one film pass-through button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |